Primex Levo Surface-Mount 6 Digit Clock with 4" Red LED Digits

Description

This 6-digit red LED digital wall clock with 4" numerals from primex is surplus from a large educational institution.  Tested working unit, time signal is acquired
from a 72 MHz remote transmitter (not included).  If your location is near a school or business site that uses these clocks and has a functioning SNS transmitter, this unit will synchronize with the remote transmitter automatically.
Sleek, low-profile design puts the focus on the bright LED digits to keep your facility running on time. Our clocks are designed to be easily viewed from up to 150 feet away.
7-segment LED digits
12- or 24-hour time display
Time/Date display option
PM indicator light
Specifications: 72MHz Digital Clocks and Timers
Parameter
Specification
LED Display
Highly visible 7-segment LED digits
2.5" model: 2.5” (6.4 cm) diagonal (hours and minutes), 1.4" (3.6 cm) diagonal (seconds)
4" model: 4.6” (11.7 cm) diagonal (hours and minutes), 2.5” (6.4 cm) diagonal (seconds)
LED Display Dimmer
100%, 75%, 50%, 25%
Time Display
12- or 24-hour time
PM indicator light
Alternating time and date display option
Hour Offset
+/- 24 hours
Receiver Sensitivity (Decode)
< -110dBm
Power Supply
100-240 VAC/ 50–60 cycle. Supplied with 10 ft (3.0 m) cord with plug and UL/cUL listed power supply
24VAC model: 18-28VAC/ 50–60 cycle. Supplied with a 10 in. (25 cm) cord with pigtail and power supply
Power Outage Memory Backup
In the event of a power outage, its internal memory maintains the correct time for a minimum of one hour without power; requires a minimum one hour of charging time.
Code Blue and Elapsed Timer Audible Beep Option
Frequency 3KHz +/-0.5KHz
Code Blue Timer Input
5-120 VAC/ DC or dry contact input
Enclosure
ABS plastic
Junction box: UL listed (UL 50E 1st Ed; listing number E469550)
Storage Temperature Range
-20° to 185° F (-29° to 85° C)
Operating Temperature Range
32° to 194° F (0° to 35° C)
Certification
FCC/IC/CE marked
All specifications are subject to change without notice.
Components specifications
The backside of a Levo Digital Clock/Timer houses the mounting, power, connection inputs, and setting panel.
Key-Hole Mount (2)
AC power supply and power cord with 2-prong plug (AC model). Power cord strain relief assembly with supplied washer and screw.
RJ45 port (PoE model)
RJ11 port (elapsed timer and code blue timer model): connection to supplied Timer Switch Control
4 pin port (code blue timer model): connection to supplied 4 pin 30 in. (76.2 cm) connector
Setting panel (options vary by model): Mini-USB port, manual dimmer display button, Reset (check-in) button