-40%
DRAFTEC BEER LINE & ACID CLEANER - 4 VERSIONS AVAILABLE
$ 5.27
- Description
- Size Guide
Description
DRAFTEC BEER LINE & ACID CLEANER FOR ALL BEER & WINE HOSE & TUBINGREMOVES HOP RESINS, YEAST RESIDUE, SUGAR BUILD-UP, BACTERIA, PROTEINS AND MOLD
32oz. Bottle
Most efficient beer line cleaner on the market
Mixes easily with water
Approved by all major U.S. breweries
100% American owned and manufactured
#101
Beer Line Cleaner
Clear; Contains no tracer dye
#103
Beer Line Cleaner
Blue Tracer Dye
#102
Acid Line Cleaner
Clear; Contains no tracer dye
Removes hard water salts & calcium build-up
#104
Acid Line Cleaner
Red Tracer Dye
DrafTec Beer & Acid Line Cleaner.
For all hard water conditions
Resists corrosion in stainless steel tanks
Lowest foam formula
Leaves surfaces free of any build-up
No classified as Non-Hazardous so there is no hazardous material shipping charge!
RECOMMENDED USAGE:
For regularly maintained lines, use 2-3 ounces per gallon of water. For above average soiled lines, use 4-5 ounces per gallon. For really dirty lines, use 6-8 ounces per gallon of water.
The U.S. Brewer's Asc. draught beer quality manual recomends 3% solution (11oz. per gallon).
DRAFT LINE CLEANING PROCEDURE:
For recirculation cleaning systems
Remove the beer faucets for hand cleaning of the parts & gaskets. Inspect gaskets for wear.
Push the beer with water out of the draft lines. Leave the lines packed with water. Fill the cleaning solution circulation unit or holding vessel with water.
In gallons, calculate the liquid volume the draft line system holds. This includes the liquid volume in the beer lines as well as the liquid volume in the cleaning solution holding vessel.
Measure out the proper amount of Draftec and add to water so that it immediately dilutes. NEVER mix by adding small amounts of water to the Draftec.
With all recirculating lines connected, pump at a rate not to exceed 2 gallons per minute.
For Static cleaning
Remove the beer by pushing with water.
Push the solution of Draftec through the lines, displacing the water.
Let sit in lines 15 to 20 minutes.
If possible, use line cleaning brush.
At end of cycle, push cleaning solution out of line with water. Continue flushing line.
Test with PH strip for ambient level.
ball lock keg,pin lock keg,cornelius keg,corny keg,homebrewing keg,beer keg,homebrewing,home winery,carpet cleaning tank,chemical tank,stainless food grade tank,
INTERNATIONAL SHIPPING NOTICE
1. Due to theft we no longer ship directly to Mexico. We will ship to a U.S. package / freight forwarder.
2. Ebay charges an EXTRA 6% to all international orders, therefore we must ADD 6% to your purchase, to be paid for via a PayPal invoice sent to you. You do not need a PayPal acct. to use the invoice.