Alstickers! for MANSORY car Sticker,Polyurethane Resin Film3.94"X0.43"(100x11mm)

Description

The image is made on a film of high quality and filled with polyurethane resin for protection against mechanical and chemical influences.You can purchase a sticker with the inscription or no inscription.The amount of 3.94x0.43 inch (100x11 mm) !!! Attention!!!Gluing only at positive temperatures (+10 C), to dry, clean and degreased surface.
Dear customers. Under the conditions of quarantine, the work of postal services has slowed down. The order delivery time may increase. You can always track your order by tracking number.
Instructions for gluing and storing the polymer-coated logo.
1. To improve the reliability of bonding of emblems you need to meet the following conditions: a) the surface temperature of bonding must not be below +68°F (+20°C )(in some cases, when the emblem is glued on a metal surface or sherokhovatosti, or powder paint and the like, the temperature of the surface bonding is advisable to bring to +73.4°F (+23°C), for example, a household dryer.
b) the adhesive layer of the emblem at the time of gluing must have a temperature not lower than + 73.4°F (+23°C) (this is a necessary temperature condition; the emblem must be kept to this recommended temperature before gluing to increase the plasticity of the adhesive layer in order to increase the reliability of gluing to the surface). c) the product with the pasted logo must be kept at a temperature not lower than + 64.4°F (+18°C) within 12 hours.
2.
The envelope with the logo, which was transported in sub-zero temperatures, it is necessary to unpack not earlier than 24 hours after finding them in a heated room with a temperature below +64,4°F (18°C).
3. The surface to which is glued the logo should be degreased, dry, smooth, clean and not spherical. Sticking the logo on a rough surface reduces the adhesion of the logo.
4. before sticking the self-adhesive logo, it should be separated from the substrate.
The adhesive base of the logo must not come into contact with other surfaces (fingers, objects, etc.) after being removed from the substrate. Please do not re-glue the logo, the adhesive strength drops dramatically.
5. storage conditions for emblems: a) room temperature from +50°F (+10°C) to +95°F (+35°C); b) relative humidity 25-70%; c) the warranty period of storage and operation is 12 months from the date of receipt of the logo at the post office in accordance with the track number.